Dji Mavic Battery Program - Skyrc e680 Instruction Manual

This charger is capable of charging, storage DJI Mavic smart battery.
Charging Mode
Connect the battery to the charger
as show on the diagram.
Mavic charging cable(SK-600023-
06) is not included in the package.
You need purchase it separately.
Turn ON the battery before you put
it in charging mode.
Press the Power Button once
BATT/PROGRAM
DJI Mavic BATT
LH3S CHARGE
TURN ON BATTERY
Storage Mode
When the battery is idle for more than ten days. It is better to discharge the
battery to 65% of total power in order to prevent swelling. If the battery level
is below 65%(15.6V), you need recharge it to 65%.
Turn ON the battery before you put it in storage mode.
BATT/PROGRAM
DJI Mavic BATT
e680

Dji Mavic Battery Program

Note: Mavic charging cable is not included in the package
Press Again and Hold
for 2 Seconds to Turn On
Click +/- to locate DJI Mavic BATT program
Click ENTER to get into CHARGE mode
Press and hold START/ENTER for 3 seconds to
start the program.
Click +/- to locate DJI Mavic BATT program
CONNECTION DIAGRAM
23 ·