Installation On The Underside Of A Desk - Furuno SC-50 Operator's Manual

1. INSTALLATION
1.3.3

Installation on the underside of a desk

The processor unit may be mounted on the underside of a desk as shown in the
figure below. Do not install it on the overhead.
Reference Direction
Mount processor unit so
reference direction is
within ± 2.5 of
fore-and-aft line.
POWER switch
(power lamp)
Bow
Port
Stern
Bow
Mounting Method: Invert
Mounting Direction: C
Port
Stern
1-14
Installation of processor unit on the underside of a desk
Connectors
Processor Unit, rear view
Mounting Method: Invert
Mounting Direction: A
Starboard
DIRECTION "A"
Starboard
DIRECTION "C"
Mounting on underside of desk
Desk
Name Plate
Name plate (other side)
Bow
Mounting Method: Invert
Mounting Direction: B
Port
Starboard
Stern
Bow
Mounting Method: Invert
Mounting Direction: D
Port
Stern
DIRECTION "B"
Starboard
DIRECTION "D"