Installation On The Underside Of A Desk - Furuno SC-110 Operator's Manual

1.3.3

Installation on the underside of a desk

The processor unit may be mounted on the underside of a desk as shown in the
figure below. Do not install it on the overhead.
Reference Direction
Mount processor unit so
reference direction is
within ± 2.5 of
fore-and-aft line.
POWER switch
(power lamp)
Port
Bow
Port
Installation of processor unit on the underside of a desk
Processor Unit, rear view
Bow
Mounting Method: Invert
Mounting Direction: A
Starboard
DIRECTION "A"
Stern
Mounting Method: Invert
Mounting Direction: C
Starboard
DIRECTION "C"
Stern
Mounting on underside of desk
Desk
Name Plate
Connectors
Bow
Port
Stern
Bow
Port
Stern
1. INSTALLATION
Name plate (other side)
Mounting Method: Invert
Mounting Direction: B
Starboard
DIRECTION "B"
Mounting Method: Invert
Mounting Direction: D
Starboard
DIRECTION "D"
1-9