Antenna Unit Sc-603 - Furuno SC-50 Operator's Manual

1.2.2

Antenna unit SC-603

Note: "Bird-repellent fixtures" (supplied) may be attached to each antenna
element and the Antenna Cover to prevent birds from alighting on the
antenna. If it is more convenient to attach them before fixing the antenna
unit to the mounting location, do step 10 in "Welding the antenna unit"
before fixing the antenna unit.
Mounting
1. Screw in three antenna elements in the Antenna Base. Remove Antenna
Cover and Arm Cover.
2. Pass the coaxial cable from each antenna element through the center of the
respective arm and then through the hole at the center of the antenna unit.
3. Orient the three antenna elements so that the protrusion on each faces the
bow.
Nut
Arm Cover S
Antenna Cover
3
Arm Cover
(Below arm)
Antenna Base
Antenna unit SC-603
Orient the three antenna
elements so the protrusion
on each faces the bow.
How to orient the antenna elements
2
Antenna
Element
1
BOW
1. INSTALLATION
1-7