When The Indicators Provide No Help; Check The Problem - Epson EH-TW5650 User Manual

Troubleshooting
Indicators
Ready
(blue)
Connecting
(Flashing blue
quickly)
Error
(Flashing blue
slowly)
Starting
Wireless LAN Off

When the Indicators Provide No Help

Check the problem

Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problems relating to im-
ages
Problems when projection
starts
Problems with the remote
control
Problems with 3D
Status
Wireless LAN is available.
Connecting to a device.
Wireless LAN error. Select Off as the Wireless LAN Power setting
in the projector's Network menu, and select On again.
If you cannot solve the problem, contact the following address.
Epson Projector Contact List
s
Wireless LAN connection is unavailable. Check that Wireless
LAN Power is set to On in the Network menu.
Problem
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
Moving images being projected from a computer are not projected.
"Not supported" is displayed.
"No Signal" is displayed
Images are fuzzy or out of focus.
Interference or distortion appears in the images.
The image is truncated (large) or small, or only a part of the image is
projected.
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
Images appear dark.
Projection stops automatically.
The projector does not turn on.
The remote control does not respond.
Cannot project correctly in 3D.
Explanation
*
80
Page
p.81
p.81
p.82
p.82
p.82
p.82
p.83
p.83
p.83
p.84
p.84
p.84
p.84