Epson EH-TW5650 User Manual page 76

Configuration Menu
Function
SSID
Search Access Point
IP Settings
(This can only be set
when Connection
Mode is set to Ad-
vanced.)
SSID Display
IP Address Display
Security menu
Function
Security
Passphrase
Reset menu
Function
Reset network settings.
Menu/Settings
Up to 32 alphanumeric
characters
To Search View
DHCP
IP Address
Subnet Mask
Gateway Address
On, Off
On, Off
Menu/Settings
No, WPA2-PSK, WPA/
WPA2-PSK
From 8 to 32 single-
byte alphanumeric
characters
You can reset all adjustment values for Network to their default settings.
Explanation
(This can only be set when Connection Mode is set to Ad-
vanced.)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
(This can only be set when Connection Mode is set to Ad-
vanced.)
Search for available wireless network access points.
indicates currently connected access points.
the access points where security is set.
If you select an access point which has security, Security menu
appears. p.75
s
Sets whether or not to use DHCP (On or Off). If this is set to
On, you cannot set any more addresses.
Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Inputs the subnet mask for the projector.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Sets whether or not to display the SSID on the LAN Standby
screen and the Home screen (On or Off).
Sets whether or not to display the IP address on the LAN
Standby screen and the Home screen (On or Off).
Explanation
Sets the security.
Select WPA2-PSK in Quick and WPA/WPA2-PSK in Ad-
vanced.
Inputs the passphrase.
It is recommended to change the passphrase periodically for
the purpose of security.
Explanation
75
indicates