When The Indicators Provide No Help; Check The Problem - Epson EH-TW5950 User Manual

Troubleshooting
Indicators
Projection in pro-
gress
(blue)
c
•
Under normal operating conditions, the
•
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
Extended - Operation - Illumination
s

When the Indicators Provide No Help

Check the problem

Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problems relating to im-
ages
Problems when projection
starts
Problems with the remote
control
Problems with 3D
Problems with HDMI
Problems with WirelessHD Cannot project WirelessHD images.
Status
The projector is operating normally.
and
o
p.73
Problem
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
Moving images being projected from a computer are not projected.
"Not supported" is displayed.
"No Signal" is displayed.
Images are fuzzy or out of focus.
Interference or distortion appears in the images.
The image is truncated (large) or small, or only a part of the image is
projected.
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
Images appear dark.
Projection stops automatically.
The projector does not turn on.
The remote control does not respond.
Cannot project correctly in 3D.
HDMI Link does not function.
The device name is not displayed under device connections.
WirelessHD audio is not output correctly.
Interference or distortion appear in WirelessHD images.
Remedy
indicators are off.
m
*
79
Page
p.80
p.80
p.81
p.81
p.81
p.82
p.82
p.83
p.83
p.83
p.84
p.84
p.85
p.85
p.86
p.86
p.86
p.87