Maintenance; Cleaning The Parts; Cleaning The Air Filter - Epson EH-TW5650 User Manual

Maintenance

Maintenance

Cleaning the Parts

You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on
the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector
can injure you severely.

Cleaning the air filter

Clean the air filter if dust has accumulated on the air filter or when the following message is displayed.
"The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace the air
filter."
c
Since the air filter is removable, you can clean both sides. Do not rinse the air filter in water. Do not
use detergents or solvents.
Attention
•
If dust collects on the air filter, it can cause the internal temperature of the projector to rise, and this can lead
to problems with operation and shorten the optical engine's service life. Clean them frequently if you are
using the projector in a particularly dusty environment.
•
Do not use an air duster. Combustible substances may remain, and dust may enter the precision components.
For ELPAF54
Remove any dust on the air filter by using a vacuum cleaner from the front side.
For ELPAF55
91