Using 3D Glasses; Charging The 3D Glasses - Epson EH-TW5650 User Manual

Useful Functions
c
•
If you are using a device or cable that does not support 3D images, 3D projection cannot be performed.
•
For details on 3D format settings on the AV device, see the documentation supplied with the AV device.
•
When the 3D format has not been correctly set up, an image will not be correctly projected as shown
below.
•
If a 3D image is not projected correctly even when a 3D format is set, the synchronization timing for
the 3D Glasses may be inversed. Inverse the synchronization timing using Inverse 3D Glasses.
Signal - 3D Setup - Inverse 3D Glasses
s
•
How a 3D image is perceived varies depending on the individual.
•
When you start projecting a 3D image, a warning about viewing 3D images is displayed. You can turn
off this warning by setting 3D Viewing Notice to Off.
•
During 3D projection, the following Configuration menu functions cannot be changed.
Aspect (Normal fixed), Overscan (Off fixed)
•
You cannot use the Split Screen function (EH-TW5650 only) during 3D projection.
•
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.

Using 3D Glasses

Use the optional 3D Glasses (ELPGS03) to view 3D images.
c
The 3D Glasses come with protective stickers. Remove the protective stickers before use.

Charging the 3D Glasses

Use the USB charging cable to connect the 3D Glasses to the USB Charging Adapter (ELPAC01), and then
connect the USB Charging Adapter to an electrical outlet.
c
•
You can only charge the 3D Glasses ELPGS03.
•
You can use the glasses for approximately three hours after charging for just three minutes. A full
charge takes 50 minutes and the glasses can be used for approximately 40 hours.
•
You can also charge by connecting the 3D Glasses to the projector. When using the projector to charge
the 3D Glasses, connect the USB charging cable to the USB (TypeA) port on the projector (you can only
charge when the projector is turned on).
p.66
Signal - 3D Setup - 3D Viewing Notice
s
p.98
s
44
p.66