Adjusting The Seat Depth; Adjust The Brakes - Vermeiren V200D Instruction Manual

N
3.4

Adjusting the seat depth

The Vermeiren V200 is adjustable in 2 seat depths by changing the cross.
Hole 1
3.5

Adjust the brakes

L
WARNING:
dealer.
Adjust the brakes according following rules:
Seat depth
460 mm (18.11 in.)
440 mm (17.32 in.) (Standard)
Hole 2
Hole 4
Cross
Risk of injury – Brakes may only be adjusted by your specialist
3
2
Cross
Hole 1 and 3
Hole 2 and 4
Table 3: Seat depth
Change the seat depth according the
following steps:
1.
Remove both clips
2. Move the cross in the desired position
(see table 3).
3. Replace both clips
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
Page 18

.

.


so the brake

.
V200
2011-01

to