Adjusting The Seat Depth; Adjust The Brakes - Vermeiren V200 Instruction Manual

3.4

Adjusting the seat depth

The Vermeiren V200 is adjustable in 2 seat depths by changing the cross.
460 mm (18.11 in.)
440 mm (17.32 in.) (Standard)
Hole 2
Hole 1
3.5

Adjust the brakes

WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
2
Seat depth
Table 3: Seat depth
Hole 4
Cross
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts d.
6. Check working of the brakes.
3
7. If necessary repeat the above steps until the
brakes are adjusted well.
ƒ‰‡
Cross
Hole 1 and 3
Hole 2 and 4
Change the seat depth according the
following steps:
1.
Remove both clips
2. Move the cross in the desired position
(see table 3).
3. Replace both clips
d
so the brake
V200
2011-01
c
.
c
.
c
e
.
e
to