Adjusting The Seat Depth; Adjust The Brakes - Vermeiren V300 XL Instruction Manual

3.4

Adjusting the seat depth

The Vermeiren V300 XL is adjustable in 3 seat depths by changing the back rest connection
.
490 mm (Standard)
3.5

Adjust the brakes

L L L L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
2
Seat depth Back rest connection
510 mm
530 mm
Table 3: Seat depth
The seat depth can be changed by the back
rest connection
steps:
1.
2.
3.
4.
Position 3
Position 2
Position 1
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts
6. Check working of the brakes.
7. If necessary repeat the above steps until the
3
brakes are adjusted well.
Page 17
Position 1
Position 2
Position 3
according the following
Remove the bolts.
Move the back rest connection
desired position (see table 3).
Retighten the bolts.
Check the seat height and seat angle.
so the brake
.
V300 XL
2013-11
in the
.
to