Adjusting The Seat Depth; Adjust The Brakes - Vermeiren V300 XL Instruction Manual

3.4

Adjusting the seat depth

The Vermeiren V300 XL is adjustable in 3 seat depths by changing the back rest connection
.
3.5

Adjust the brakes

L L L L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
2
Seat depth
490 mm (Standard)
510 mm
530 mm
Table 3: Seat depth
Position 3
Position 2
Position 1
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
3. Loosen the bolts
4. Pull the brake mechanism over the guide
5. Retighten the bolts
6. Check working of the brakes.
7. If necessary repeat the above steps until the
3
Page 17
Back rest connection
Position 1
Position 2
Position 3
The seat depth can be changed by the back
rest connection according the following
steps:
1.
Remove the bolts.
2. Move the back rest connection
desired position (see table 3).
3. Retighten the bolts.
4. Check the seat height and seat angle.
backwards.
so the brake
mechanism can slide over the guide
the desired position.
.
brakes are adjusted well.
V300 XL
2013-11
in the
.
to