Texas Instruments BQ25720 User Manual
Texas Instruments BQ25720 User Manual

Texas Instruments BQ25720 User Manual

Evaluation module

Advertisement

Quick Links

www.ti.com
User's Guide
BQ25720, BQ25723 Evaluation Module
The BQ25720EVM and BQ25723EVM evaluation modules (EVM) are SMBus or I
boost charger. The input voltage range is from 3.5 V to 26 V, with a programmable output of 1-4 cells and a
charge output current range of 64 mA to 8.128 A. This EVM does not include the EV2400 interface device; the
EV2400 must be ordered separately to evaluate the BQ2572x EVM.
1
Introduction.............................................................................................................................................................................2
1.1 EVM Features....................................................................................................................................................................
1.2 General Description...........................................................................................................................................................
2 Test Summary.........................................................................................................................................................................
2.1 Definitions..........................................................................................................................................................................
2.2 Equipment..........................................................................................................................................................................
Setup................................................................................................................................................................6
2.4
Procedure...........................................................................................................................................................................9
Materials.................................................................................................................................................................10
3.2 Board Assembly Layout...................................................................................................................................................
3.3 Schematic........................................................................................................................................................................
EN_OTG....................................................................................................................................................................9
Figure 3-1. Top Assembly..........................................................................................................................................................
Figure 3-2. Bottom Assembly....................................................................................................................................................
Figure 3-3. PCB Layer 1............................................................................................................................................................
Figure 3-4. PCB Layer 2............................................................................................................................................................
Figure 3-5. PCB Layer 3............................................................................................................................................................
Figure 3-6. PCB Layer 4............................................................................................................................................................
Table 1-1. I/O Description............................................................................................................................................................
Trademarks
®
USB Type-C
is a registered trademark of USB Implementer's Forum, Inc..
Intel
®
is a registered trademark of Intel.
All trademarks are the property of their respective owners.
SLUUC74 - MAY 2021
Submit Document Feedback
ABSTRACT

Table of Contents

Schematics...............................................................................................................10
List of Figures
EVM).....................................................................................................7
Software..................................................................................................8
List of Tables
Setting.........................................................................................................................3
Conditions.........................................................................................................................4
Materials.................................................................................................................................10
Copyright © 2021 Texas Instruments Incorporated
Table of Contents
2
C-controlled NVDC-1 buck
BQ25720, BQ25723 Evaluation Module
2
2
5
5
5
12
18
12
13
14
15
16
17
3
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BQ25720 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments BQ25720

  • Page 1: Table Of Contents

    USB Implementer's Forum, Inc.. Intel ® is a registered trademark of Intel. All trademarks are the property of their respective owners. SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 2: Introduction

    CPU for throttle back, when needed. For more details on register functions, see the BQ25720 SMBus 1- to 4-Cell Narrow VDC Buck-Boost Battery Charge Controller With System Power Monitor and Processor Hot Monitor BQ25723 I2C 1- to 4-Cell Narrow VDC Buck-Boost Battery Charge Controller With System Power Monitor and Processor Hot Monitor data sheets.
  • Page 3: Table 1-1. I/O Description

    JP7 (2-3): VBUS pin on ACP Jumper on: Onboard LDO to drive the EVM 3V3 Installed Jumper off: disconnect onboard LDO to drive the EVM 3V3 SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 4: Table 1-3. Recommended Operating Conditions

    Voltage applied at VBAT terminal 19.2 Supply current, I Maximum input current from AC adapter input Output current, I Output current Operating junction temperature °C range, T BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 5: Test Summary

    A computer with at least one USB port and a USB cable. 6. EV2400 Communication Kit 7. Software Download and properly install bqStudio from https://www.ti.com/tool/BQSTUDIO. SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 6: Equipment Setup

    Set 7 V at KEPCO load output. Turn off load #2. Note Add a 47-µF capacitor on the BAT pin when testing without a real battery. 6. Connect J3 to the EV2400. Connect J3 to the SMBus PORT 1 (BQ25720) or I C PORT 2 (BQ25723) on the EV2400.
  • Page 7: Figure 2-2. Original Test Setup For Bms035 (Bq2572X Evm)

    8. Turn on the computer and power supply #1. Open the bqStudio software. a. Select Charger and click the Next button. b. For SMBus BQ25720, select “Charger_1_00_BQ25720.bqz” on the Select a Target Page. For I BQ25723, select “Charger_1_00_BQ25723.bqz” on the Select a Target Page.
  • Page 8: Figure 2-3. Main Window Of The Bq2572X Evaluation

    Test Summary www.ti.com Figure 2-3. Main Window of the BQ2572x Evaluation Software BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 9: Procedure

    1. Make sure the Equipment Setup steps are followed. 2. Set the Tgt Address to 12(9) for BQ25720 or D6(6B) for BQ25723. 3. Write “020E” to charge option 0 register 0x12H (BQ25720) or 0x00H (BQ25723). Measure → V(J1(V )) = 10 V ±0.5 V Measure →...
  • Page 10: Bill Of Materials, Board Layout, And Schematics

    RES, 300 k, 1%, 0.1 W, AEC-Q200 Grade 0, 0603 CRCW0603300KFKEA Vishay-Dale R9, R28 100k RES, 100 k, 1%, 0.1 W, 0603 RC0603FR-07100KL Yageo BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 11 100k RES, 100 k, 1%, 0.1 W, AEC-Q200 Grade 0, 0603 CRCW0603100KFKEA Vishay-Dale SH-JP4, SH-JP6 Shunt, 100mil, Gold plated, Black Shunt SNT-100-BK-G Samtec SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 12: Board Assembly Layout

    Bill of Materials, Board Layout, and Schematics www.ti.com 3.2 Board Assembly Layout Figure 3-1 through Figure 3-6 illustrate the board assembly and layout images. Figure 3-1. Top Assembly BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 13: Figure 3-2. Bottom Assembly

    Bill of Materials, Board Layout, and Schematics Figure 3-2. Bottom Assembly SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 14: Figure 3-3. Pcb Layer 1

    Bill of Materials, Board Layout, and Schematics www.ti.com Figure 3-3. PCB Layer 1 BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 15: Figure 3-4. Pcb Layer 2

    Bill of Materials, Board Layout, and Schematics Figure 3-4. PCB Layer 2 SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 16: Figure 3-5. Pcb Layer 3

    Bill of Materials, Board Layout, and Schematics www.ti.com Figure 3-5. PCB Layer 3 BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 17: Figure 3-6. Pcb Layer 4

    Bill of Materials, Board Layout, and Schematics Figure 3-6. PCB Layer 4 SLUUC74 – MAY 2021 BQ25720, BQ25723 Evaluation Module Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 18: Schematic

    TP37 2.0M TP38 0.1uF 0.1uF Receptacle_3x1 300k N2510-6002-RB PGND U1 is BQ25720 for BQ25720EVM, while BQ25723 for BQ25723EVM. Figure 3-7. BQ2572x EVM Schematic BQ25720, BQ25723 Evaluation Module SLUUC74 – MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 19 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 20 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 21 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 22 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 23 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
  • Page 24 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2021, Texas Instruments Incorporated...

This manual is also suitable for:

Bq25723Bq25720evmBq25723evm

Table of Contents