Texas Instruments BQ25710EVM-017 User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. BQ25710EVM-017
  6. User manual
Texas Instruments BQ25710EVM-017 User Manual

Texas Instruments BQ25710EVM-017 User Manual

Bq2571 series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
The BQ25710EVM-017 and BQ25713EVM-017 evaluation modules (EVM) are SMBus or I
NVDC-1 buck boost charger. The input voltage range is between 3.5 V and 24 V, with a programmable
output of 1-4 cells and a charge output current range of 64 mA to 8.128 A. This EVM does not include the
EV2400 interface device; the EV2400 must be ordered separately to evaluate the BQ2571x EVM.
...................................................................................................................
1
1.1
1.2
2
2.1
2.2
2.3
2.4
3
Bill of Materials, Board Layout, and Schematics
3.1
Bill of Materials
3.2
Board Assembly Layout
3.3
Schematic
1
EV2400 Connections
2
Original Test Setup for BMS017 (BQ2571x EVM)
3
Main Window of the BQ2571x Evaluation Software
......................................................................................................................
4
5
6
7
BQ2571x EVM Schematic
1
I/O Description
2
Controls and Key Parameters Setting
3
Recommended Operating Conditions
4
BQ2571x EVM Bill of Materials
Trademarks
USB Type-C is a trademark of USB Implementer's Forum, Inc..
All other trademarks are the property of their respective owners.
SLUUBT8A - June 2018 - Revised July 2018
Submit Documentation Feedback
.......................................................................................................
................................................................................................
................................................................................................................
............................................................................................................
...........................................................................................................
....................................................................................................
............................................................................................................
....................................................................................................
..........................................................................................
..........................................................................................................
........................................................................................................
...............................................................................................................
...........................................................................................................
................................................................................................
...............................................................................................................
....................................................................................
.....................................................................................
...........................................................................................
Copyright © 2018, Texas Instruments Incorporated
SLUUBT8A - June 2018 - Revised July 2018
BQ2571x Evaluation Module
Contents
.......................................................................
List of Figures
......................................................................
....................................................................
List of Tables
User's Guide
2
C-controlled
BQ2571x Evaluation Module
2
2
2
5
5
5
6
9
10
10
13
15
6
7
8
9
13
14
15
3
3
4
10
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BQ25710EVM-017 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments BQ25710EVM-017

Summary of Contents for Texas Instruments BQ25710EVM-017

  • Page 1: Table Of Contents

    SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module The BQ25710EVM-017 and BQ25713EVM-017 evaluation modules (EVM) are SMBus or I C-controlled NVDC-1 buck boost charger. The input voltage range is between 3.5 V and 24 V, with a programmable output of 1–4 cells and a charge output current range of 64 mA to 8.128 A.

  • Page 2: Introduction

    PROCHOT output goes directly to the CPU for throttle back, when needed. For more details on register functions, see the data sheets – BQ25710 (SLUSD20) and BQ25713 (SLUSD83). BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 3 Jumper on: On-board LDO to drive the EVM 3V3 Installed Jumper off: disconnect on-board LDO to drive the EVM 3V3 SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 4 Supply current, I Maximum input current from ac adapter input Output current, I Output current Operating junction temperature °C range, T BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 5: Test Summary

    A computer with at least one USB port and a USB cable. 6. EV2400 Communication Kit 7. Software Download and properly install BQstudio (Version: 1.3.85 or newer) from http://www.ti.com/tool/BQstudio. SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 6: Equipment Setup

    The picture shows the SMBus version EVM connection. If using the BQ25713EVM-017, move the connector to the C port. Figure 1. EV2400 Connections BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 7 After selecting the target device, change “update mode” from “immediate” to “manual”, click “Read Register” and the following interface is presented. SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 8 Test Summary www.ti.com Figure 3. Main Window of the BQ2571x Evaluation Software BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 9: Procedure

    4. Write “0200” to the OTG voltage register. Write “4000” to the OTG current registers. 5. Select EN_OTG in Charge Option 3. Measure → V(J1(V )) = 5 V ±1 V Figure 4. EN_OTG SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 10 Technology, Inc. Unless otherwise noted in the Alternate Part Number or Alternate Manufacturer columns, all parts may be substituted with equivalents. BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 11 RES, 2.00k ohm, 1%, 0.1W, 0603 0603 CRCW06032K00FKEA Vishay-Dale 2.0Meg RES, 2.0 M, 5%, 0.1 W, 0603 0603 CRCW06032M00JNEA Vishay-Dale SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 12 Notes: Unless otherwise noted in the Alternate Part Number and/or Alternate Manufacturer columns, all parts may be substituted with equivalents. BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 13: Top Assembly

    Bill of Materials, Board Layout, and Schematics www.ti.com Board Assembly Layout Figure 5 Figure 6 illustrate the board assembly layout images. Figure 5. Top Assembly SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 14: Bottom Assembly

    Bill of Materials, Board Layout, and Schematics www.ti.com Figure 6. Bottom Assembly BQ2571x Evaluation Module SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 15 Bill of Materials, Board Layout, and Schematics www.ti.com Schematic Figure 7 shows the EVM schematic. Figure 7. BQ2571x EVM Schematic SLUUBT8A – June 2018 – Revised July 2018 BQ2571x Evaluation Module Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...

  • Page 16: Revision History

    NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (June 2018) to A Revision ......................Page ......................• Deleted Advance Information Revision History SLUUBT8A – June 2018 – Revised July 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
  • Page 17 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 18 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 19 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
  • Page 20 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2018, Texas Instruments Incorporated...
  • Page 21 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...

This manual is also suitable for:

Bq25713evm-017

Table of Contents