Programmer - Dataman -448PRO2 User Manual

MachineTM with the industry-standard Serial Vector Format (SVF) language for Boundary
Scan programming and test.
The IspVM System software generates VME files supporting both ispJTAG and non-Lattice
JTAG files which are compliant to the IEEE 1149.1 standard and support SVF or IEEE 1532
formats. The VME file is a hex coded file that takes the chain information from the IspVM
System window. The devices can be programmed in ZIF socket of the programmer or in
target system through ISP connector. It is indicated by [PLCC44](VME) or (ISP-VME) suffix
after name of selected device in control program. Multiple devices are possible to program
and test via JTAG chain: JTAG chain (ISP-VME).
More information on the website: www.latticesemi.com
Software tools:
Lattice: ispLEVER, IspVM System ISP Programming Software, PAC-Designer Software,
svf2vme utility (converts a serial vector file to a VME file)
Device / Device info
The command provides additional information about the current device - size of device,
organization, programming algorithm and a list of programmers (including auxiliary modules),
that supported this device. You can find here a package information and other general
information about current device too.
The reserved key <Ctrl+F1> will bring out this menu from any menu and any time
immediately.

Programmer

Menu Programmer includes commands used for work with programmers.
120