Dataman-48Pro2 / Dataman-48Pro2C Elements - Dataman -448PRO2 User Manual

VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF
file and contains high-level IEEE 1149.1 bus operations. VME files are generated by design
software which is provided by manufacturer of respective programmable device. Chips are
programmed in ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)
interface).
Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-Jam) or
JTAG chain (ISP-VME).
Attaching of more DATAMAN-48PRO2 / DATAMAN-48PRO2C programmers to the same PC
(through USB port) is achieved a powerful multiprogramming system, which support as
many chips, as are supported by DATAMAN-48PRO2 / DATAMAN-48PRO2C
programmer and without obvious decreasing of programming speed. It is important to
know, there is a concurrent multiprogramming - each programmer works independently and
each programmer can program different chip, if necessary.
It is important to remember that in most cases new devices require only a software update
due to the DATAMAN-48PRO2 / DATAMAN-48PRO2C is truly universal programmer. With
our prompt service you can have new devices can be added to the current list within hours!
Advanced design including protection circuits, original brand components and careful
manufacturing and burning allows us to provide a three-year warranty on parts and labor for
the DATAMAN-48PRO2 / DATAMAN-48PRO2C (limited 25,000-cycle warranty on ZIF
socket).
DATAMAN-48PRO2 / DATAMAN-48PRO2C
elements
1) 48 pin ZIF socket
2) work result LEDs
3) power/sleep LED
4) YES! Button
5) ISP connector
6) power switch
7) "GND" connector can be used for grounding of the programmer
"ESD wrist strap" connector is place for attaching of ESD wrist strap
DATAMAN-48PRO2 / DATAMAN-48PRO2C
33