Table of Contents
Advertisement
❽ Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Indicator Messages
POWER Indicator
Indicator display
Off
Flashing
Blue (short flashes)
Blue (long flashes)
Orange (short flashes)
Orange (long flashes)
Lit
Blue
Red
Orange
STATUS Indicator
Indicator display
Off
Flashing
Red (once per
cycle)
Red (four times
per cycle)
Green (twice per
cycle)
Orange (once
per cycle)
Orange (twice
per cycle)
Lit
Green
Orange
* Sleep mode refers to the state whereby the functional restrictions due to the standby mode setting are removed.
Power is off.
Preparing to turn power on
Off timer (enabled)
Program timer (off time enabled)
Projector cooling
Program timer (on time enabled)
Power on
Standby mode (NORMAL)
Standby mode (NETWORK STANDBY)
Projector status
No problem, or STANDBY MODE -
"NETWORK STANDBY"
Lens is not fixed on.
Fan problem
Performing the lens calibration
Network conflict
Trouble occurrence while the lens
shift is functioned as accidentally cut-
ting off the power supply.
STANDBY MODE in sleep mode*
Button has been pressed while pro-
jector is in key lock mode
Projector's ID number and remote
control's ID number do not match
Projector status
–
Check fixing conditions of the lens.
The cooling fan has stopped turning. Contact
projector customer support center for repairs.
—
It is not possible to connect the projector's built-in
LAN and wireless LAN simultaneously to the same
network. To connect the projector's built-in LAN and
wireless LAN simultaneously, connect them to differ-
ent networks.
In the STANDBY state, the status indicator does not
flash in Orange even if the network confliction is oc-
cured.
Carry out the lens calibration
–
The projector's keys are locked. The setting must be
canceled to operate the projector. (→ Page 126)
Check the control IDs. (→ Pages 127)
178
8. Appendix
Procedure
–
Wait a while.
–
Wait a while.
–
–
–
–
Procedure
Advertisement
Table of Contents
