Table of Contents
Advertisement
Portrait projection (vertical orientation)
This projector can be installed vertically to display computer images in
portrait orientation.
The menu displaying position can be shifted by selecting the [SETUP] →
[MENU(2)] → [MENU ANGLE].
Precautions during installation
• Please do not install the projector in a vertical orientation on top of the floor or table on its own. If not, the projec-
tor may fall over, resulting in injury, damage or malfunction.
• A stand for supporting the projector needs to be made for this purpose to keep intake air flow securely and
preventive measure of falling over. The stand must be designed such that the center of gravity of the projector
is located well within the legs of the stand. If not, the projector may fall over and result in injury, damage and
malfunction.
• If the projector is installed on which the intake vent facing down, optical part life may be shorten.
6. Installation and Connections
155
Advertisement
Table of Contents
