Read this manual thoroughly to operate the Network function. First, read the user's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the user's manuals should be followed strictly. User Manual for LHD700...
WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
● We assume no responsibility for the loss or damage of data, or damage of the computer caused by using this projector. Making back-up copies of valuable data in your computer is recommended. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
. T h e mana gin g computer needs to provide an SNMP managing software. Trap Refer to the user's manual of You received a Trap. the "PJ Network Manager" Trap supplied separately for further SNMP Manager details. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
If you do not use the func- tion E-mail Alert, this application is not required. Network specifications of the projector LAN Terminal Data communication standards 10Base-T/100Base-TX/1000Base-T compatible Physical layer 10Base-T Protocol TCP/IP LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 10
Other product or brand names in this manual are registered trademarks or trademarks of their respective owners. * Unauthorized use of a part or whole of the contents in this manual is prohibited. * The contents of this manual are subject to change without notice. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
So it is not required to install the software into your computer. For PJ Network Manager function, it is required to install the software. Please see the user's manual of "PJ Network Manager Function". LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
“Please wait...” message will appear, and switching operation will start. Switching will take a while and the projector’s LINK/ACT Lamp will be on or blink, and after completing the operation, the “Please wait...” message will disappear. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 15
*1 Set "On" only when the DHCP server is available on your network environment. *2 Set [255.255.255.255] if the network does not provide the gateway (router). *3 Set [255.255.255.255] if you do not use the function E-mail alert. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Select "Network information" in the Network menu and press Point 8 or SELECT button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.) * The numerical value is a setting example. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
3. Another confirmation box appears and select "Yes" and then press SELECT button. 4. All the wired LAN settings will go back to the factory default settings. For details, refer to “Wired LAN factory default settings” as shown in the table below. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Describes basic operations and settings for controlling the projec- tor by using the web browser. It is required that computer and projector is connected to the network and the network address is properly configured. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
* The entering User Name must be "user" and it can not be changed. [Note] When accessing the projector for the first time or the Network PIN code "0000" is set, the auto-login will be performed and the next main setting page is displayed. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Sub menu tab Switches the sub menu tab. Setting page Main menu Displays the control and For selection of control and setting items according to setting items of the projector. the selected menu. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Each item has a valid setting range. The setting value exceeding this becomes invalid. Some con- ✐ trol items can not be used depending on the selecting input mode or functions of the projector you use. In this case, the values of those items are indicated with "---". LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 23
How to use the setting page Radio button setting Select an item by selecting a radio button. Check box setting Select items by ticking on check boxes. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Network PIN code ..Sets the Network PIN code to login the setting page (+p.23) Temperature ..Switches display temperature unit. (Centigrade, Fahrenheit) PJLink ....... Switches PJLink password authentication. (ON, OFF) (+p.23) Password ....Password for PJLink function (+p.23) LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
The default Network PIN code [0000] means no Network PIN code is set. When you connect the projector to the network, it is recommended to set a new Network PIN ✐ code. Only a four-digit number is valid for the Network PIN code. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
* If you make incorrect settings, you cannot find out the new network settings. Be careful to set up them correctly, otherwise you cannot connect to the projector. It is recommended to make a note of them. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 27
(from 1 to 65535) AMX D. D. If your network environment uses an AMX controller, select ON to allow the projector to be detected by AMX Device Discovery. (ON, OFF) For more details, visit http://www.amx.com/. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Password ......... Enter SMTP password. (up to 63 characters) POP server ....... Enter server name or IP address of the POP server. (up to 60 characters) POP server port ....Enter Port number of the POP server. (from 1 to 65535) LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 29
✐ The projector does not send message to the address set in "Administrator address" text box. If you want to send e-mails to the administrator address, enter the administrator address into "Add address" text box. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 30
Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control. Up to 99,999 hours can be set for use time. ✐ LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
This alert mail will not be sent when unchecking the mail sending condition "When PJ lamp replacement time is reached". LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Community name(refer) ..Enter community name (read only). Default name is "public". Trap Item Description Community name ...... Enter community name to send "Trap". Default name is "public". Trap address ........Enter IP address of the SNMP manager computer to receive "Trap". LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 33
Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control. Up to 99,999 hours can be set for the time setting. ✐ LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 34
Chapter 3 Basic Setting and Operation LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Chapter 4 Controlling the Projector Describes controlling and setting of the projector by using the web browser. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
* The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting". (+p.22) ✐ The projector cannot be turned on while the projector is on cooling down. ✐ The web browser checks and updates the projector's condition every 30 seconds automatically. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 37
To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [2] on Setting main menu. (+p.42) LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
For further information , refer to the projector's user's manual. ✐ When the projector is in standby, all the controlling items are inactive. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i and 1080p. ✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.39) is available, they are also listed together with the above mode. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
✐ The mark " " means that the available image mode in the Real selected input source. The error message appears when Image1 - 10 selecting the disabled image mode indicated with "*". LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Mode Store ..Stores the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull-down menu. Mode Free .... Clear the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull- down menu. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Custom) Ceiling ..... Sets the image top/bottom and left/ right reversed. (ON, OFF) Rear ......Sets the image left/right reversed. (ON, OFF) * See the next page for the description of other functions. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Lens shift ....Positions to the desired point by pressing the Up/Down/Left/Right buttons. Click Reset to return to the center position. * Step(s) ....Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right buttons to adjust them quickly. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again. 2. Access this page with the web browser. 3. Click Execute button on the PJ lock suspend. * See the next page for the description of other functions. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ time, Network PIN code, Network setting * This function is not effective for the settings of Network address settings, e-mail settings, etc. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
* When PIP mode is active, displays Input, System, and Screen to "PIP mode". Network Items Description MAC address Displays MAC address of the projector. IP address Displays the IP address of the projector. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 47
Good condition. Blue Filter is almost clogged. Yellow/Gray Filter is clogged. Replace a filter with new one. * When the projector cannot decode the return from the filter cartridge, Red/Gray this icon also appears. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 48
Chapter 4 Controlling the Projector LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Computer Name: PC10 IP Address : 192.168.0.10 Subnet Mask : 255.255.255.0 Default Gateway : ✐ When the projector is connected to the computer directly without hub, the UTP cross cable should be used. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
2. The telnet application will start and the following window will be displayed. Type as below to connect the projector. > open 192.168.1.201 10000 [return] * Use the IP address assigned to the projector. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 53
Please try again for the connection. If the password or any command is not entered for more than 30 seconds, the communication will ✐ be disconnected automatically. Please try again for the connection. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
✐ There are various ways to change your browser preferences depending on the version or applica- tions. Please see the setting instructions on next page for example and also refer to on-line help of your web browser. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level… button. On the security setting window, scroll down and find the Scripting item, make sure that "Enable" is selected in item Active Scripting. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
If you connect the projector to the computer directly with UTP cross cable, this must be unchecked. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area network, enter the IP address or domain name here. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 57
UTP cross cable, this must be selected. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area net- work, enter the IP address or domain name here. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 58
If you connect the projector to the computer directly with UTP cross cable, they must be unchecked. To designate proxy settings that will not use the proxy server when accessing the projector installed in the local area network, enter the IP address or domain name here. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
(Connect to the company’s network from the branch office or maintenance office by using private line.) ☛ Use of internet (Connect to the company’s network from your home, branch office or some other places by using the internet.) LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 60
Can I register the setting page as a web browser "Favorites" or "Bookmarks"? Please add "Login" page to your "Favorites" or "Bookmarks". Do not add the speci- fied setting page because it will not be able to perform the password authentica- tion correctly. LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 61
SMTP server in your LAN. The SMTP server located outside of your LAN may not be available for security reason. For further information please contact your network administrator (+ p.26). LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 62
What is the MAC address assigned to the projector? The MAC address is displayed in "Network information" menu of the projector (+ p.14) and in "Information" menu through the web browser (+ p.45). LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 63
For further information please consult your local deal- er. The version number of the firmware is indicated on the lower part of the "Initial setting" page. Version of the firmware LHD700 Network User Manual 020-000446-01 Rev.1 (11-2011)
Page 64
Americas Canada Chile Christie Digital Systems USA, Inc. Christie Digital Systems Canada, Inc. Representative Office 10550 Camden Drive 809 Wellington St. N. Christie Digital Systems USA, Inc. Cypress CA 90630 Kitchener, Ontario N2G 4Y7 Av. Pedro Fontova 7619 of 60...
Page 66
Corporate offi ces USA – Cypress ph: 714-236-8610 Canada – Kitchener ph: 519-744-8005 Worldwide offi ces United Kingdom Eastern Europe Singapore Japan ph: +44 118 977 8000 ph: +36 (0) 1 47 48 100 ph: +65 6877-8737 ph: 81-3-3599-7481 France Middle East Beijing South Korea...