Table of Contents
Advertisement
RFS4000_Baseline.book Page 25 Tuesday, September 28, 2010 9:55 AM
5
Quick Start Information
Once the RFS4011 Series Integrated Services Controller hardware is installed and powered on,
complete the following steps to get the device up and running on and access the management
functions on the controller:
1.
Connect one end of an Ethernet cable to any of the five LAN ports on the front of the RFS4011
and connect the other end to a computer with a working web browser.
2.
Set the computer to use an IP address between 192.168.0.10 and 192.168.0.250 on the
connected port. Set a subnet / network mask of 255.255.255.0.
3.
Once the computer has an IP address, point the web broswer to: http://192.168.0.1/ and the
following login screen will display.
4.
Enter the default username admin in the Username field.
5.
Enter the default password motorola in the Password field.
6.
Click the Login button to load the management interface.
Quick Start Information
25
Advertisement
Table of Contents
