Table of Contents
Advertisement
RFS4000_Baseline.book Page 23 Tuesday, September 28, 2010 9:55 AM
2.
On the configuration computer, configure a terminal emulation application
(such as HyperTerminal) as follows:
Terminal Type
Port
Terminal Settings
4.7 Supplying Power to the RFS4011
1.
Plug the power supply (Motorola Part Number: 86-120786-01) into the power inlet at the back of
the RFS4011.
2.
Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.
VT-100
COM port
19200bps transfer rate
8 data bits
no parity
1 stop bit
no flow control
no hardware compression
Hardware Setup
Power Inlet
23
Advertisement
Table of Contents
