Table of Contents
Advertisement
RFS4000_Baseline.book Page 14 Tuesday, September 28, 2010 9:55 AM
14
RFS4011 Series Integrated Services Controller: Installation Guide
4.1 Cabling Information
1
R A D IO
2
1 1
R A D IO
The RFS4011 Series Integrated Services Controller has five RJ-45 Gigabit Ethernet LAN ports, 1
combo Gigabit (RJ45 + SFP) uplink port, one USB port, one Console connector and one ExpressCard
slot. The above diagram shows each of those ports and the cables or devices attached to them. The
sections that follow describe connection and cabling information for each port. For software
configuration, please see the RFS Series Integrated Services Controller Wi-NG System Reference
Guide available from the Motorola website.
4.2 Gigabit Ethernet on the RFS4011
The RFS4011 has five RJ-45 Gigabit Ethernet LAN ports and one 1 combo Gigabit (RJ45 + SFP) uplink
port. Using the RJ-45 ports requires connecting a Category-6 Ethernet cable to the port. To use the
Gigabit SFP port, first install the SFP Module (Motorola Part Number: Fiber-3000-1S-WWR).
Console connector
UPLINK
USB
port
Gigabit Ethernet
RJ-45 connectors
ExpressCard
Advertisement
Table of Contents
