Table of Contents
Advertisement
RFS4000_Baseline.book Page 4 Tuesday, September 28, 2010 9:55 AM
4
RFS4011 Series Integrated Services Controller: Installation Guide
3
LED Codes
The RFS4011 Series Integrated Services Controller has eight status LEDs on its front panel. Four
LEDs for the system, fan, and temperature status, and 2 each per radio to show access (per band) or
sensor operation. Each of the six Gigabit Ethernet Ports have two status LEDs. These LEDs display
two colors (green & amber), and three lit states (solid, blinking, and off). Five of the Gigabit Ethernet
Ports also support Power over Ethernet (PoE) and have corresponding PoE LEDs.The following tables
decode the combinations of LED colors and states for the System Status, Radio and the Gigabit
Ethernet and PoE LEDs.
3.1 System Status LEDs
System Status 1
System Status 2
Fan status
Temperature status
1
SYS
2
Advertisement
Table of Contents
