Table of Contents
Advertisement
g Setting [STANDBY MODE] to [ECO] or [NETWORK]
g Setting the [SETUP] menu → [DATE AND TIME] → [ADJUST CLOCK] → [NTP SYNCHRONIZATION] to [ON]
Refer to "Setting the date and time automatically" (x page 73) for details.
g Setting the input to signage
[INITIAL STARTUP]
Set the startup method when the circuit breaker is turned on or when the plug of the power cord is connected to
an outlet.
1)
Press as to select [INITIAL STARTUP].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[LAST MEMORY]
[STANDBY]
[ON]
[STARTUP INPUT SELECT]
Set the input when the projector is turned on to start projection.
1)
Press as to select [STARTUP INPUT SELECT].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[LAST USED]
[HDMI]
[MIRRORING]
[Panasonic APPLICATION]
[MEMORY VIEWER]
[SIGNAGE]
Note
f If [POWER] of the restart option is enabled in "Setting the restart option" (x page 67) which explains the [SETUP] menu → [SIGNAGE],
the input switches to signage regardless of the [STARTUP INPUT SELECT] setting, as the signage playback (schedule) restarts at the same
time when the power is turned on.
[AUDIO SETTING]
Set detailed audio functions.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation
Press w.
Press q.
Adjusting the right/left audio balance
1)
Press as to select [AUDIO SETTING].
70 - ENGLISH
Chapter 4 Settings — [SETUP] menu
Starts up the projector in a status before turning off the circuit breaker or disconnecting the plug of the
power cord from the outlet.
Starts up the projector in standby.
Starts projecting immediately.
Keeps the input that has been selected the last time.
Sets the input to HDMI.
Sets the input to MIRRORING.
Sets the input to Panasonic APPLICATION.
Sets the input to Memory Viewer.
Sets the input to signage.
Adjustment
Increases the volume.
Decreases the volume.
Range of adjustment
0 - 63
Advertisement
Table of Contents
