Table of Contents
Advertisement
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1)
Press as on the remote control to select the display language.
2)
Press the <ENTER> button on the remote control to perform next initial setting.
Initial setting (installation setting)
Set [PROJECTION METHOD] and [VERTICAL FLIP] depending on the installation conditions. Refer to
"Installation form" (x page 30) for details.
Once the initial setting is completed, the settings for each item can be changed from the [SETUP] menu.
1)
Press as on the remote control to select an item.
2)
Press qw on the remote control to switch the setting.
3)
Press the <ENTER> button on the remote control to perform next initial setting.
Initial setting (standby mode)
Set the operation mode during the standby. The default setting is [ECO] that keeps power consumption low
during standby. If you use the network function during standby, set to [NORMAL]. If you want to keep the power
consumption low during standby, and to perform operation of power-on via wired LAN while the Wake on LAN
function is in use, set to [NETWORK]. Once the initial setting is completed, setting can be changed from the
[SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE].
1)
Press qw on the remote control to switch the setting.
2)
Press the <ENTER> button on the remote control to perform next initial setting.
42 - ENGLISH
Chapter 3 Basic Operations — Turning on/off the projector
INITIAL SETTING
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
SUOMI
NORSK
Please select DISPLAY LANGUAGE.
SELECT
SET
ENTER
INITIAL SETTING
PROJECTION METHOD
VERTICAL FLIP
Change PROJECTION METHOD or VERTICAL FLIP
if the screen display is upside down or inverted.
MENU SELECT
SET
ENTER
INITIAL SETTING
STANDBY MODE
Please set the power setting at standby mode.
Network function will be restricted
when it sets to ECO or Network.
SET
ENTER
1/4
2/4
FRONT
▶
◀
OFF
CHANGE
3/4
◀
ECO
▶
CHANGE
Advertisement
Table of Contents
