Table of Contents
Advertisement
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 52) for the operation of the menu screen.
f After selecting the item, press asqw to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2)
Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[DYNAMIC]
[NORMAL]
[NATURAL]
Note
f The [PICTURE MODE] setting is also reflected in the menu screen.
[CONTRAST]
Adjust the contrast of the colors.
1)
Press as to select [CONTRAST].
2)
Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
Attention
f Adjust [BRIGHTNESS] first when you need to adjust the black level.
[BRIGHTNESS]
Adjust the dark (black) part of the projected image.
1)
Press as to select [BRIGHTNESS].
2)
Press qw or the <ENTER> button.
f The [BRIGHTNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
[COLOR]
Adjust the color saturation of the projected image.
1)
Press as to select [COLOR].
56 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
The light output is maximized for use in bright areas.
The image becomes suitable for movie-type video contents in general.
The image becomes suitable for using in low-light areas.
Adjustment
Brightens the screen and makes the color deeper.
Darkens the screen and makes the color lighter.
Adjustment
Increases the brightness of the dark (black) parts of the screen.
Reduces the brightness of the dark (black) parts of the screen.
Range of adjustment
-31 - +31
Range of adjustment
-31 - +31
Advertisement
Table of Contents
