Table of Contents
Advertisement
Connection example for image transfer
(Example) Displaying copyright-protected contents
Projector
Illustration of
connection
Intel
WiDi / Intel
®
compatible device
Input
MIRRORING
Communication
IEEE802.11a/n
method
Connection method WPS + Wi-Fi Direct
Image transmission
Intel
WiDi / Intel
®
method
Setting for projector
1)
Turn on the projector.
2)
Press the <MENU> button to open the [NETWORK] menu and set [WIRELESS LAN] to either
[M-DIRECT] or [USER].
3)
Configure the settings of the connection method selected in Step 2).
f Refer to [WIRELESS LAN] (x page 77) for details.
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f If multiple devices are to be connected, set IP addresses that do not overlap.
f Enter SSID correctly in single-byte alphanumeric characters.
f ANY connection is prohibited in a wireless LAN connection.
f This setting is not necessary when connecting MIRRORING. Refer to "MIRRORING function" (x page 125) for details.
f The following settings are configured as the factory defaults.
[SIMPLE]
[M-DIRECT]
104 - ENGLISH
Chapter 5 Operations — Network connection
MIRRORING
Pro WiDi / Miracast
®
Pro WiDi / Miracast
®
[KEY]
[IP ADDRESS]
[SUBNET MASK]
[SSID]
[CHANNEL]
[KEY]
Image transfer application software
(Example) Displaying on multiple screens
Projector
iPad/iPhone/iPod touch, Android device, and computer
on which Panasonic's image transfer application
software has been installed
Panasonic APPLICATION
IEEE802.11b/g/n
Panasonic exclusive method + connection by user
Panasonic exclusive method
proj + the last four digits of the network ID.
192.168.12.100
255.255.255.0
M-DIRECTxxxx (xxxx stands for the last four-digit number of the
network ID.)
1
The same character string as SSID
Advertisement
Table of Contents
