Table of Contents
Advertisement
8
Preparation
2
Preparation
2
Introduction
The dome cameras are designed for installation in an
indoor or outdoor video surveillance system.
The camera incorporates the digital signal processor, pan/
tilt mechanism, zoom lens and RS-485 communication
interface in a compact outdoor enclosure.
Features
•
High Sensitivity Support
The camera provides the high quality picture with
4.5 mm EX-view HAD CCD.
•
Preset Position
Preset position is the function to register camera
monitoring positions (preset positions). By using
LKD1000 controller, you can register presets with
position number. Maximum 128 Preset Positions are
available. By entering the position numbers, you can
move cameras to the preset positions. The moving
speed and holding time are adjustable.
•
Preset Tour
Preset Tour is the function to go through all the
registered camera monitoring positions (preset
positions). During the working PRESET TOUR, The
FOCUS could not be operated properly under -10 °C
(for LT713 series only)
•
Group Tour
Maximum 9 group tours are able to compose the
group of preset, pattern, auto pan that the operator
can program to be linked together in a sequence.
•
Pattern recording function
A routine of manual operations can be stored and
reproduced repeatedly. The Pan, Tilt and Zoom controls
are available for pattern recording.
LT913-B.CNLDLLI_MFL66281601_ENG.indd 8
NOTE
The available total time of pattern differs depending on
camera's operation. When the pattern recording is full,
the pattern recording will automatically stop.
•
Privacy Mask
Privacy zone feature enables users to veil unwanted
zones. This setting is used for masking unwanted zones,
hiding them from display on the monitor screen. Up to
8 zones can be registered.
•
Auto Pan
The camera has an Auto Pan function that enables to
keep surveillance on every detail occurring around the
specific area, which is preset to watch in advance. The
camera can pan among the maximum 8 points you will
set. The moving speed and holding time are adjustable.
•
Auto Flip
When the camera is operated to tilt through the 90°, it
can be watched the opposite side of the locations by
Auto Flip of a 180° horizontally.
•
Optical Zoom
-
LT913 series: The optical zoom range is 1x to 37x.
-
LT713 series: The optical zoom range is 1x to 27x.
•
Digital Zoom
Digital zoom enhances the systems zoom range to 12
times beyond the optical zoom limit.
Total system zoom range is below.
-
LT913 series: 37x (1x digital zoom) to 444x (12x
digital zoom)
-
LT713 series: 27x (1x digital zoom) to 324x (12x
digital zoom)
•
Alarm In function (4 channels)
Alarm input signals are supplied from external devices
through the ALARM IN connector to activate 'go to
preset' function.
•
Alarm Out function (2 channels)
8/6/10 3:59 PM
Advertisement
Table of Contents
