7. Tighten the locking screw.
8. Connect the cables to the cable jacks of the camera
body. After installing the camera, you should arrange
the cables using the outlet box to protect the cables.
CAUTION
Do not expose the connected part of the camera cable
jacks in the rain or moisture.
Check the red stripe on one side of the safety cable.
LT913-B.CNLDLLI_MFL66281601_ENG.indd 25
Wall mount (optional)
Install the camera by the following order.
1. Connect the safety cable to the wall mount assembly.
Red Stripe
Installation
25
3
8/6/10 4:00 PM