Table of Contents
Advertisement
Special setting
Proportional PT
This function optimizes the image by automatically adjusting the PAN/
TILT (horizontal/vertical rotation) speed according to the zoom ratio.
1. Select [PROPORTIONAL PT] option on the [SPECIAL] menu.
2. Use
or
button to toggle it on and off.
•
ON : Pan/tilt speed is in inverse proportion to the zoom ratio.
•
OFF : The speed is constant at the fastest level regardless of the
zoom ratio.
Compass
You can display the north, south, east and west information on the
screen.
1. Select [COMPASS] option on the [SPECIAL] menu.
2. Set the [COMPASS] option to [SET] and then press
3. Select north point using the PTZ control buttons and then press
button.
4. Set the [COMPASS] option to [ON].
Operation and settings
Home position
The home position is the camera's basic position.
The camera returns to this position whenever you want.
Use the following procedure to make the home position.
1. Select [HOME POSITION] option on the [SPECIAL] menu.
2. Use
or
3. Press
button.
4. Select [SET] option and then press
5. Select the home position where you want and then press
6. Select [DWELL TIME] option and then select the dwell time.
7. Select [RETURN] option and press
menu.
»
Go to Home position
1. Select [HOME POSITION] option on the [SPECIAL] menu.
2. Use
3. Press
4. Select [GO] option and then press
move to the home position.
Note:
If you set the [HOME POSITION] to [ON], the [AUTO RETURN] option is
set to [OFF] automatically and you can not use it.
(LW9226(I)/LW9228(I) series only)
button.
button to set it ON.
button.
button to exit the setting
or
button to set it ON.
button.
button. The camera will
button.
49
Advertisement
Table of Contents
