Table of Contents
Advertisement
Motion detect
Preview
You can preview the motion detection window on the preview
window.
General
> Sensitivity: Enter the sensitivity to detect an object in motion.
> Save: Click this button to confirm the settings.
18
How to set the motion detect window
1. Click the [Add] button. The motion detect window is displayed.
You can add the five windows maximum for motion detection
area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the
window size for motion detection.
4. Click the [Save] button to save the settings.
Note:
•
You can reset the window size. Click one of the window edge or
corner and drag & drop to reset the motion detection area.
•
If LSW2010, LDW2010, LVS201 models, Motion Detection can
be activated when at least one of channels (Master/Slave) is
enabled, Video codec is set to H.264 and GOP size is more than
2.
•
If not LSW2010, LDW2010, LVS201 models, Motion Detection
can be activated when Master channel is enabled, Video codec
is set to H.264 and GOP size is more than 2.
Operation and settings
Advertisement
Table of Contents
