User Setup - Streamax X3-H0204 MDVR User Manual

Under this mode, MDVR's start up or shut down time will not affect the ignition.
Remark:
If use setup as Ignition or Timer Mode, Ignition ON or Timer start time can trigger MDVR start up.
And only when Ignition off and Timer end time, MDVR will shut down.
Start-Sleep

Sleep Mode: Currently, there is only no consumption standby mode available.
Low Volta protect: Enabling the low voltage shutdown protection mode selected.
Battery low voltage: Protect the vehicle battery. When consistently below the standard value, it will
countdown shutdown. As for a 12V vehicle, the default is 9V, while a 24V vehicle is 21V.
Voltage start up: low-voltage protection, when the battery voltage is consistently greater than the
standard value, it will automatically boot. As for a 12V vehicle, the default is 12.5V, while a 24V
vehicle is 24.5V.
Low volt upload: The low-voltage protection will be reported to the platform after it is ticked.

2.5.4. USER SETUP

In the basic settings, click user settings, enter the following interface, user can enter setting menu.
For more information, please visit our website
27-71
www.en.streamax.com
User manual for X3-H0204