Page 1
User manual for X3-H0204 User Manual X3-H0204 MDVR Mobile Digital Video Recorder Copyright 2013-2015, Streamax Technology Co., Ltd All Rights Reserved 1-71 www.en.streamax.com For more information, please visit our website...
Page 2
Under copyright laws, the content of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form, in whole or in part, without prior written consent of Streamax Technology Co., Ltd. Copyright (2013-2015) 2-71 www.en.streamax.com...
Page 3
Insulate circuit ground and metal shell for all the peripherals. Before installation, please open the package and ensure that all parts are included. If there are any problems, please contact us as soon as possible. 3-71 www.en.streamax.com For more information, please visit our website...
1. PRODUCT CHARACTERISTICS 1.1. OVERVIEW Streamax X3-H0204 is a functional Mobile Digital Video Recorder specially designed for vehicle video surveillance and remote monitoring. It has a high-speed processor and embedded operating system, combining with the most advanced H.264 video compression / decompression technology, 3G/4G network, GPS positioning technology, as well as WIFI.
Page 7
Water Proof Rate IP54 Physical Dimension (L × W × H)(mm) 255.3 x 150 x 89.1 Characteristic Weight 2.2Kg Operating Temperature -40℃- +70℃(With heater) or -10℃- +70℃ Environment Operating Relative Humidity 8%-90%(No Condense) 7-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 1.3. SYSTEM DIAGRAM 1.4. EXTERNAL INTERFACE DIMENSION (Unit: mm) 8-71 www.en.streamax.com For more information, please visit our website...
Page 9
User manual for X3-H0204 FRONT PANEL Serial No. Description Hard disk module Status LED USB interface REAR PANEL 9-71 www.en.streamax.com For more information, please visit our website...
Right click the mouse, the shortcut menu will pop up, left click login picture, login screen will pop up. Left click on the login button to login and right click to log out. 12-71 www.en.streamax.com For more information, please visit our website...
Page 13
User must enter the right password again if entering the wrong ones; Click cancel to exit the login interface; Language: It supports language switch. "language" (Lang) means the current interface adopts Chinese; 13-71 www.en.streamax.com For more information, please visit our website...
Page 14
Move Cursor to【 Esc】 position, Press【 Enter】 or the left click mouse to exit the keypad, the entered contents will not be written to the edit box. 14-71 www.en.streamax.com For more information, please visit our website...
Video search interface contains video file search, video data backup and video playback function. When there is a hard disk or SD card, enter the video search interface. Following is the REC Search interface: 15-71 www.en.streamax.com For more information, please visit our website...
Page 16
The main record means HDD record while sub record and mirror record are dual-stream records. Select the date with record, click next, and then enter the following interface: Following are the search options and search result interface: 16-71 www.en.streamax.com For more information, please visit our website...
Page 17
Video playback: Choose the channel No., select start time to play < default start from 0 >, click the playback button to playback the video. In playback interface, user can choose fast forward or fast backward to play the video, the button in the 17-71 www.en.streamax.com For more information, please visit our website...
User can also get out the hard drive or SD card, export and playback the video by professional software. 2.3. LOG SEARCH In the log search interface, it records and displays all alarm events and login operation log. Enter the "log query”, the interface will be shown as following: 18-71 www.en.streamax.com For more information, please visit our website...
Page 19
Log Search interface instruction: Calendar: the date with log will be marked on the calendar with green color. Remark: There is no color classification in the “log mark”, and all are green ones. 19-71 www.en.streamax.com For more information, please visit our website...
Page 20
Can’t export all log files of the specified date. Can link to video file, click on button to playback video files. Unlock: Select log, and unlock it. Then the alarm log of lock will be cleared. Remark: 20-71 www.en.streamax.com For more information, please visit our website...
When lock the video file, system will record alarm log and lock log. The locked video file can only be unlocked from alarm log. 2.4. SYSTEM STATUS User can login the interface with no access restrictions. System- Version information System- Modules System-Server status 21-71 www.en.streamax.com For more information, please visit our website...
Page 22
User manual for X3-H0204 System - Environment System-Storage: 22-71 www.en.streamax.com For more information, please visit our website...
2.5. BASIC SETUP Click setup button and enter the following interfaces: 2.5.1. REGISTER INFOMATION (SETUP VEHICLE INFORMATION) Register information-Device info: Device ID: Currently, it is not useful. Register information- Vehicle info 23-71 www.en.streamax.com For more information, please visit our website...
Register information—Driver info: Driver number: Input manually. Driver name: Input manually. 2.5.2. TIME SETUP Time setup-General Date format: Setup the date format of device Time format: 24 hours or 12 hours 24-71 www.en.streamax.com For more information, please visit our website...
Page 25
Synchronize time according to time zone Multi-mode can be selected for time synchronization. If one works, the others take no affect. Otherwise, it switches to another sync mode every 5 minutes. Time setup-DST 25-71 www.en.streamax.com For more information, please visit our website...
ON/OFF mode: 3 modes, including ignition, timer and ignition or timer. Ignition: Input ignition delay time for shutdown delay function Timer: When setup the start mode as Timer, please setup the start time and end time 26-71 www.en.streamax.com For more information, please visit our website...
Low volt upload: The low-voltage protection will be reported to the platform after it is ticked. 2.5.4. USER SETUP In the basic settings, click user settings, enter the following interface, user can enter setting menu. 27-71 www.en.streamax.com For more information, please visit our website...
Page 28
User name cannot be empty, not the same with the existed user name while the user password can be empty. User name and password can be modified. Select a user, click the "Edit User" button, enter the following interface: 28-71 www.en.streamax.com For more information, please visit our website...
Switch from static IP to automatically obtain IP mode, it can display dynamic IP, but the static IP parameters will not be covered, to restore the last saved static IP after switching back. Network Settings - Ports: 29-71 www.en.streamax.com For more information, please visit our website...
Page 30
Password: Manually input Static IP: Select to use static IP, or MDVR will get dynamic IP Network-Communication: Dialing wireless network, user needs to choose the module type and setup dialing parameters 30-71 www.en.streamax.com For more information, please visit our website...
Page 31
When there is SIM and normal 3G/4G signal, it will dial automatically. Network- Server Center server: It supports 6 servers at most, and server 1 cannot be deleted manually. ON: Enable the current server. 31-71 www.en.streamax.com For more information, please visit our website...
Registration server port: To run the registration server port. Media server address: To run the media server address. Media server port: To run the media server port. 2.5.6. APPLICATION Application-FTP Client FTP Enable: Enable FTP. 32-71 www.en.streamax.com For more information, please visit our website...
Image setup: Set the live-view parameters, including brightness, contrast, etc. Startup Screen: Set the live-view screen, it can be single-screen or quad screen or nine screen Channel: Set the channel when live-view Live view-Auto Loop: 33-71 www.en.streamax.com For more information, please visit our website...
Page 34
Auto polling: Enable the auto pulling Live view-Live OSD : It displays the information on screen, such as time, speed, license plate, GPS... The default is only the time, and the position cannot be set. 34-71 www.en.streamax.com For more information, please visit our website...
Overwrite: The earliest recording file will be deleted while the HDD or SD card is full to realize loop recording. Lock duration: Protect the record file to be deleted by fault, default is 7 days. Pre-recording: Pre-record before the alarm happens. Default is 15min, 0-60min optional. Record-->Main Stream: 35-71 www.en.streamax.com For more information, please visit our website...
Page 36
Quality: Picture Quality of the recording. Record mode: Ignition, Time, Event optional. Each channel can be set separately. The sub-stream and mirror record are the same Audio: Enable the audio. Note: Audio cannot be record separately 36-71 www.en.streamax.com For more information, please visit our website...
Page 37
Alarm backup: Channel is selectable. The parameters are the same with main stream Sub stream: Channel is selectable. Recording parameters are configurable Sub stream includes channel number, enable or not, audio, resolution, frame rate and image quality. 37-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 Sub stream channel: It is selectable according to recording mode. Record-->OSD Embedded key information to video file for easily check when playback. 2.6.3. IPC SETUP IPC setup: 38-71 www.en.streamax.com For more information, please visit our website...
Page 39
Fast setup: Search all the IP cameras in LAN network, and auto assign IP address to IP camera. IPC local address: To search network camera of local area network at Intranet. The default one is 10.100.100.1. 39-71 www.en.streamax.com For more information, please visit our website...
Address: It is valid with serial mode. Test: It is to test PTZ is available or not. Click it to pop up PTZ control panel. 2.7. DATA COLLECTION 2.7.1. GENERAL General-->Sensor 40-71 www.en.streamax.com For more information, please visit our website...
Page 41
RS232-1 and RS232-2, with the following features: three axis sensor, expansion, 485 bus and GPS data. RS485-1 and RS485-2, with the following features: PTZ, control panel, 485 bus and GPS data. Baud Rate: 2400-115200, 9 classes optional. Remarks: 41-71 www.en.streamax.com For more information, please visit our website...
General-->speed Unit: KM/H and MPH selectable. Source: GPS, pulse or both optional. Calibration mode: No need to calibrate if setup as satellite mode. 2.7.2. SNAP SETTING Snap Setting-->Time snap 42-71 www.en.streamax.com For more information, please visit our website...
Page 43
End time: Stop snapping. Setup: Delete and set. Time snap: Enable to snap at the setting time. Add: To add snap period, and it supports 8 pieces at most. Snap Setting--> Trigger snap 43-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 Trigger snap: It snaps when alarm is trigger. 2.7.3. ECO-DRIVING (It is still developing.) 44-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 2.8. ALARM 2.8.1. BASE Base-->Speed alarm 45-71 www.en.streamax.com For more information, please visit our website...
Page 46
10 km/hour, TSS sends over speed alarm broadcast and records when it reaches 50 km/h. Speed: It is the alarm speed. Alarm duration: Alarm output duration Linkage: When alarm triggered, link to other business operation. 46-71 www.en.streamax.com For more information, please visit our website...
Page 47
Linkage screen: Enable to link the channel to show full image when there is alarm. ( Depends on the MDVR model, display split 1/4/9 optional.) PB alarm duration: It means the available alarm duration after urgent alarm is removed. Alarm snap: Enable to link snap. Base- Panic alarm: 47-71 www.en.streamax.com For more information, please visit our website...
Page 48
Alarm type: Important type and general type optional. Trigger: Click any button to delay the time till it reaches the setting time to alarm. Linkage: When alarm is triggered, link to business operation. 48-71 www.en.streamax.com For more information, please visit our website...
Page 49
Linkage screen: Enable to link the channel to show full image when there is alarm. (Depends on the MDVR model, display split 1/4/9 optional.) PB alarm duration: It means the available alarm duration after urgent alarm is removed. Alarm snap: Enable to link snap. 49-71 www.en.streamax.com For more information, please visit our website...
Page 50
Alarm type: Important type and general type optional. Trigger: Low and high optional. It triggers alarm when it is low as default. Linkage: When alarm is triggered, link to business operation. 50-71 www.en.streamax.com For more information, please visit our website...
Page 51
Linkage screen: Enable to link the channel to show full image when there is alarm. (Depends on the MDVR model, display split 1/4/9 optional.) PB alarm duration: It means the available alarm duration after urgent alarm is removed. Alarm snap: Enable to link snap. 51-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 2.8.2. VIDEO Video-Video loss Name: The default name is video loss. Enable: Enable the video loss. Alarm type: Important type and general type optional. Trigger: 52-71 www.en.streamax.com For more information, please visit our website...
Page 53
Video loss set: It includes all video channels that can be selected. Set period: Set the checking period when video loss alarm is triggered. Linkage: When alarm is triggered, link to business operation. 53-71 www.en.streamax.com For more information, please visit our website...
Page 54
Linkage screen: Enable to link the channel to show full image when there is alarm. (Depends on the MDVR model, display split 1/4/9 optional.) PB alarm duration: It means the available alarm duration after urgent alarm is removed. Alarm snap: Enable to link snap. 54-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 2.8.3. ADVANCE Name: The default name is ACC alarm. Enable: Enable the ACC alarm. Trigger: Set the threshold value of X/Y/Z. Linkage: When alarm is triggered, link to business operation. 55-71 www.en.streamax.com For more information, please visit our website...
MDVR model, display split 1/4/9 optional.) PB alarm duration: It means the available alarm duration after urgent alarm is removed. Alarm snap: Enable to link snap. X:0.0, Y:0.0, Z:0.0: The real time acceleration information. 2.9. MAINTENANCE 56-71 www.en.streamax.com For more information, please visit our website...
It won’t import the register info and speed adaption info. 2.9.2. DATA EXPORT User can export any file. File type: GPS data file, vehicle info file, ACC info file, Can info file, Dial info file and Captured pic. 57-71 www.en.streamax.com For more information, please visit our website...
Insert flash drive and enter the upgrade interface, click software upgrade and it will indicate that upgrade file is importing. MDVR reboot up and enter into upgrade interface after importing successfully. 58-71 www.en.streamax.com For more information, please visit our website...
Capacity info: Display the correct info means HDD working fine Format: Click format and it will refresh the current formatted volume information after formatting successfully. It can record after formatting successfully and no need to reboot up. 59-71 www.en.streamax.com For more information, please visit our website...
MDVR. And the default IP address is 192.168.1.100 Interface will pop up a window to install N9M activex, click install. Refresh the web page, enter default user name admin/admin to log in. 60-71 www.en.streamax.com For more information, please visit our website...
Icons: quad, 9-split, preview, next page, sound, capture and video parameters. Stream switch: main stream, sub-stream and network transmission sub stream. Log out: log out and come to the log in interface 3.3. PLAYBACK 62-71 www.en.streamax.com For more information, please visit our website...
Page 63
User manual for X3-H0204 If the date is marked as color green, it means there is recording. 63-71 www.en.streamax.com For more information, please visit our website...
Recording playback window: Video window, play time-line, play control button, window switch... Record list: It displays all the record. Click backup download video file to local computer hard disk. 3.4. MAINTENANCE 64-71 www.en.streamax.com For more information, please visit our website...
Basic information: It contains the current state & history state of channel video and storage. 3.4.2. DEVICE MODULE Device module: It is about the current state of module, WIFI module and satellite location module. 65-71 www.en.streamax.com For more information, please visit our website...
User manual for X3-H0204 3.4.3. STORAGE DEVICE Storage device: There are the volume information & format operation of storage (hard disk/flash drive/SD card), and the path of snap & record backup. 66-71 www.en.streamax.com For more information, please visit our website...
Log: There is Log type (operation log, alarm log and locked log), operation type (IO alarm, panel alarm, speed alarm, video loss and ACC alarm) date, and log export. 3.5. CONFIGURATION 67-71 www.en.streamax.com For more information, please visit our website...
Page 68
User manual for X3-H0204 The parameter setting is the same as the local setting. User can view the operation at the local setting. 68-71 www.en.streamax.com For more information, please visit our website...
Check if the ACC line connection mode is correct; and check whether there is voltage on ACC yellow line when the key is turned off. If the device has been set with schedule recording, it can’t shutdown if it is still during recording time 70-71 www.en.streamax.com For more information, please visit our website...
Page 71
User manual for X3-H0204 of the task table. Which IP waterproof level does Streamax device support? Currently, X7 and X5-E0804 support waterproof IP 54. How to install the WIFI antenna? The antenna must be installed on unobstructed place of the roof, and be fixed with glue.