Table of Contents
Advertisement
o IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future if it needs to be serviced.
o Insert the fixing clips into the holes around the side of the hob
(under the level of the ceramic glass).
o Once they are in position, push the tops of the fixing clips
inwards, towards the main body of the hob. Until they click into
place.
o Gently lower the hob into the aperture hole that you have cut
out. Then press down on the hob surface, until the fixing clips
lock into position against the worktop.
24
Advertisement
Table of Contents
