Enlargement And Reduction Copying; Automatic Magnification Selection (Ams) - Toshiba ES9465 MFP Copying Manual

Table of Contents

Advertisement

Enlargement and Reduction Copying

You can change the reproduction ratio of copied images in the following procedures:

Automatic Magnification Selection (AMS):

You need to specify the copy paper size in advance. Then this equipment will detect the original size and automatically
select the optimal reproduction ratio for the copy paper size. Automatic size detection for originals on the original glass is
available only for ES9455 MFP / ES9475 MFP Series.
Specifying both original size and copy paper size separately:
You need to specify both the original size and the copy paper size separately in advance. According to the sizes you
specified, the optimal reproduction ratio is selected automatically. This feature is used when Automatic Magnification
Selection is not available, such as when copying OHP film originals.
Specifying reproduction ratio manually:
You can select the desired reproduction ratio by pressing [ZOOM] or one-touch zoom buttons on the touch panel.
Copying photo originals in the optimal reproduction ratio for copy paper size (PHOTO ZOOM)
You can copy photo originals in the reproduction ratio best suited to the copy paper size.
The available range of reproduction ratio differs depending on whether the original is placed on the original glass or on
the RADF (Reversing Automatic Document Feeder).
Original glass: 25 to 400%
RADF: 25 to 200%

Automatic Magnification Selection (AMS)

Specify the copy paper size in advance so that this equipment will detect the original size and automatically select the
optimal reproduction ratio to the copy paper size. Automatic size detection for originals on the original glass is available
only for ES9455 MFP / ES9475 MFP Series.
This function is available when the size of the originals is as follows:
North America: LD, LG, LT, LT-R, ST-R and COMP (COMP is available only when the RADF is used.)
Other than North America: A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO (FOLIO is available only when the RADF is used.)
This function does not work properly for the originals noted below. Select other methods when copying them.
Highly transparent originals (e.g. OHP film, tracing paper)
Totally dark originals or ones with dark borders
Non-standard size originals (e.g. newspapers, magazines)
1
Place paper in the tray(s).
2
Press [ZOOM] on the touch panel.
3 BASIC COPY MODES

Enlargement and Reduction Copying

65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es9475 mfpEs9455 mfp

Table of Contents