Table of Contents
Advertisement
3 BASIC COPY MODES
Rotate sort mode
When you make more than one set of copies, one set can be made to exit on top of another set, alternating in portrait and
landscape directions. This mode is called the rotate sort mode. Use 2 trays and 2 stacks of paper of the same size. Place
one stack of paper in one tray in a portrait direction and place the other in another tray in a landscape direction before you
start copying.
A4, B5 and LT sized paper placed on the tray or MPT can be used.
The rotate sort mode is not available when Automatic Paper Selection is selected.
1
Place paper in the tray(s).
Place one stack of paper in one tray in a portrait direction and place the other in another tray in a landscape
direction.
2
Place the original(s).
3
Press [FINISHING] on the touch panel.
80
Selecting Finishing Mode
Advertisement
Table of Contents
