Toshiba ES9465 MFP Copying Manual page 134

4 EDITING FUNCTIONS
2
Press [OK].
Job build is now set and the message below appears.
3
Place the first stack of originals, and then select settings.
When placing the original on the original glass, remember that 1 page is equal to 1 job.
When placing mixed-size originals on the RADF, see the following page:
P.60 "Copying mixed-size originals in one operation"
If you want to use a particular tray, select it.
Press [SETTINGS] on the touch panel to confirm the current settings.
If you want to change the settings, press the [RESET] button on the control panel, and then restart the
procedure from step 1.
132 Job Build