Vehicle Detection - HIKVISION DS-7600NXI-I/S User Manual

Step 3 Select a Camera to configure.
Step 4 Check Enable Face Detection.
For some IP cameras, the checkbox is grey and cannot be checked. In this situation, the function is
enabled by default.
Step 5 Optionally, check Save VCA Picture to save the captured pictures of face detection.
Step 6 Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range: [1-5]. The higher
the value is, the more easily the face can be detected.
Step 7 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 9 Click Apply.

12.3 Vehicle Detection

Purpose
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Network Video Recorder User Manual
Figure 12-2 Face Detection
116