HIKVISION DS-7600NXI-I/S User Manual page 145

1) Create the verification code in the Verification Code text field.
2) Confirm the verification code.
3) Read Terms of Service and Privacy Policy before enabling the service.
4) Click OK to save the settings and return to the Hik-Connect page.

Hik-Connect is disabled by default.

The verification code is empty when the device leaves factory.

The verification code must contain 6 to 12 letters or numbers and is case
sensitive.

Every time you enable Hik-Connect, the Service Terms page pops up and you
should read Terms of Service and Privacy Policy before enabling it.
Step 3 If you want to customize the server, enable Custom and enter the Server Address in the
text field.
Step 4 Click Save.
Step 5 After configuration, you can access and manage the DVR by your mobile phone or by the
website (www.hik-connect.com).
Network Video Recorder User Manual
Figure 16-3 Service Terms
Figure 16-4 Hik-Connect Settings
144