Installation - Dimplex CDFI1000-PRO Owner's Manual

Installation

The CDFI1000-PRO and
CDFI500-PRO are supplied in an
assembled state and are designed
to be permanently installed. The
units come ready for hardwire
installation and the use of the
water refill containers.
WARNING: Construction and
electrical outlet wiring must
comply with local building codes
and other applicable regulations
Product Dimensions
CDFI500P
CDFI500-PRO
CDFI500P
20.04 in. (509 mm)
20.04 in. (509 mm)
20.04 in. (509 mm)
20.04 in. (509 mm)
CDFI1000P
CDFI1000-PRO
CDFI1000P
6
Media Plate: 11.94 in. (303 mm)
Logset: 13.94 in. (353 mm)
Media Plate: 11.94 in. (303 mm)
Logset: 13.94 in. (353 mm)
40.08 in. (1018 mm)
40.08 in. (1018 mm)
40.08 in. (1018 mm)
40.08 in. (1018 mm)
to reduce the risk of fire, electric
shock and injury to persons.
WARNING: To reduce the risk of
fire, do not store or use gasoline
or other flammable vapours or
liquids in the vicinity of the unit.
!
NOTE: A 15 Amp, 120 Volt
circuit is required. A dedicated
circuit is preferred but not essential
in all cases. A dedicated circuit will
be required if, after installation,
the circuit breaker trips or the fuse
blows on a regular basis when the
cassette is operating. Additional
!
NOTE: Optimal installation height is
60" (152.4 cm) to the bottom of the media
plate or log set. Installing the product
above this height may reduce the flame
visibility.
Adjustable from
9.13 in. (232 mm)
Adjustable from
to 9.63 in. (245 mm)
9.13 in. (232 mm)
to 9.63 in. (245 mm)
!
NOTE: When preparing the
opening for the unit ¼ in. (6.4
mm) of clearance should be
maintained from each surface
to ensure easy installation.
Media Plate: 11.94 in. (303 mm)
Logset: 13.94 in. (353 mm)
Media Plate: 11.94 in. (303 mm)
Logset: 13.94 in. (353 mm)
Adjustable from
9.13 in. (232 mm)
Adjustable from
to 9.63 in. (245 mm)
9.13 in. (232 mm)
to 9.63 in. (245 mm)
www.dimplex.com