Rs-232 Commands - ATEN CS724KM-AT User Manual

RS-232 Commands

After you login via HyperTerminal (see Console Login - HyperTerminal,
page 41), you can use the instructions below to send RS-232 commands to
control the CS724KM from a remote system.
When the RS-232 link is opened, the CS724KM will no longer accept
commands from front panel buttons and most hotkey functions (excluding
mouse cursor shift and monitor layout).
For more detailed instructions and information about each of the RS-232
commands listed below, please refer to the previous chapters of the CS724KM
user manual.
Rules for each command:
Each command string can be separated with a space.
The ASCII code for Enter is 0x0D0A.
Use the Formula - to set Parameters - to create a Command.
Verification
After sending a command, a verification message appears at the end of the
command line.
Response Message
command OK
command incorrect
Description
Command or parameter is correct.
Command or parameter is incorrect.
Chapter 7. RS-232 Commands
43