ATEN CS724KM-AT User Manual page 30

CS724KM User Manual
Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),
do the
following:
1. Invoke HSM (see page 17).
2. Press [X] [Enter].
This procedure is a toggle. Repeat to revert to the original setting.
Firmware Upgrade Mode
To set the switch to Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 17).
2. Key in: [U] [P] [G] [R] [A] [D] [E].
3. Press [Enter]. The front panel LEDs flash to indicate the upgrade has
started.
To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the switch to its default hotkey settings, do the following:
1. Invoke HSM (see page 17).
2. Press [R] [Enter].
All hotkey settings return to the factory default values (See Hotkey Default
Settings, page 60).
Mouse Emulation
To toggle between mouse emulation enabled and disabled, do the following:
1. Invoke HSM (see page 17
2. Press [M].
This procedure is a toggle. Repeat to revert to the original setting
20
).