CS724KM User Manual
About this Manual
This user manual is provided to help you get the most from your CS724KM
unit. It covers all aspects of installation, configuration and operation. An
overview of the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the CS724KM. Its purpose,
features and benefits are presented, and its front and back panel components
are described.
Chapter 2, Hardware Setup, describes how to set up your installation. The
necessary steps are provided.
Chapter 3, Basic Operation, explains the fundamental concepts involved
in operating the CS724KM.
Chapter 4, Hotkey Operation, details all of the concepts and procedures
involved in the Hotkey operation of your CS724KM installation.
Chapter 5, Boundless Switching Utility, details installing and using the
GUI based software used to configure your CS724KM installation.
Chapter 6, The Firmware Upgrade Utility, explains how to upgrade the
CS724KM's firmware with the latest version available.
Chapter 7, RS-232 Commands, provides a complete list of the serial
commands used to configure the CS724KM through the RS-232 Serial Port.
An Appendix, provides specifications and other technical information
regarding the CS724KM.
viii