ATEN CS724KM-AT User Manual page 44

CS724KM User Manual
Item
Resolution
Screen Orientation
Ratio
Save to local
Save to device
4. After adding Display icons to represent the physical monitor setup, use the
drop-down menu of each Display to set the port.
In a Single Stage Installation (page 7) choose option: P1, P2, P3, P4, or no
port.
In a Daisy Chain Installation (page 10) choose options according to the
Station Switch – Primary: P1, P2, P3, P4; or Secondary: S1, S2, S3, S4.
5. Click Save to local to save the layout configuration file to disk; or Save to
device to upload and apply the layout to the CS724KM.
34
Select a Display in the left panel and use the drop-down
menu to configure the screen size. This setting must be
configured correctly for each display so that the
CS724KM knows when to switch computers. You must
reconfigure this setting whenever the resolution of the
display changes.
Note: You can also use the Screen Size hotkey to
configure the displays (see Screen Size, page 22).
Select a Display in the left panel and click to set the
screen orientation: Portrait or Landscape.
Use the Ratio slidebar to zoom in and zoom out of the
page.
Click Save to local to save the current layout
configuration to the local disk drive.
This uploads the layout configuration and applies it to
the CS724KM.
Click Save to device when the CS724KM is attached to
the computer running the Boundless Switching
Configuration Utility. If no CS724KM is connected, you
will be prompted to connect one.
Description