6. RS232 Control
6.1 Installation/uninstallation of RS232 Control Software
Installation Copy the control software file to the computer connected with the Matrix
Switcher.
Uninstallation Delete all the control software files in corresponding file path.
6.2 Basic Settings
Firstly, connect the Matrix Switcher with necessary input devices and output devices.
Then, connect it with a PC installed RS232 control software. Double-click the software
icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below:
The interface of the control software is showed as below:
Parameter Configuration
area
Set the parameters (baud rate, data bit, stop bit and parity bit) correctly to ensure
Figure 6- 2 Control Interface of
4K 4x4 HDMI2.0 Matrix Switcher
Figure 6- 1 Icon of
Monitoring area, indicates
whether the command
sent works.
Command Sending area
CommWatch
9
CommWatch