Table of Contents
Advertisement
③
CONTROL
④
DC 24V
⑤
Ground
Pictures shown in this manual are for reference only.
HDMI: 4 in total, connect with HDMI displays.
EDID: 4-pin EDID DIP switchers to set EDID data, "1"
stands for "On", "0" stands for "Off". Refer to 4.2 EDID
Configurarion for more detials.
RS232: Serial control port, connect with control device.
IR IN: Connects with external IR receiver for using the
IR remote to control the Matrix Switcher.
TCP/IP: Connect control PC for TCP/IP control.
Connect with 24VDC 1.25A power adaptor.
Connect to ground.
3
4K 4x4 HDMI2.0 Matrix Switcher
Advertisement
Table of Contents
