Enable/Disable Digital Audio - Kensence KX-HDMI-44 User Manual

EDIDPCM[x].
EDIDG[x].
EDIDMInit.
EDIDM[X]B[Y].
EDID/[x]/[y].
EDIDUpgrade[x]
.
GetInPortEDID[
X]
%9979.

6.3.7 Enable/disable Digital Audio

Command
DigitAudioON[x
].
DigitAudioOFF[
x].
not available, then set it as initialized
EDID data.
Set the audio part of input port [x] to
PCM format in EDID database.
Get EDID data from output [x] and
display the output port number.
Restore the factory default EDID data
for each input.
Manually EDID switching. Enable
input [Y] to learn the EDID data of
output [X]. If the EDID data is not
available, then set it as initialized
EDID data.
Set the EDID data of input port [x] to
built-in EDID No. [y]. [y] = 0~11,
correspond to the 12 embedded EDID
data separately.
Upgrade EDID data via the RS232
port.
X represents the input port, and x=5
represents all input ports.
When the switcher receives the
command, it will show a message to
prompt you to send EDID file (.bin
file). Operations will be canceled after
10 seconds.
Get the EDID data of input [x], [x]=1~4
Get the DIP switcher status
Function
Enable SPDIF audio output port x.
 X=1, 2, 3, 4, enable the port x.
 X=5, enable all ports.
Disable SPDIF audio output port x.
 X=1, 2, 3, 4, disable the port x.
 X=5, disable all ports.
4K 4x4 HDMI2.0 Matrix Switcher
13
EDIDPCM[x]
Hexadecimal
data and carriage
return character
EDIDMInit.
EDIDM3B1
EDID/[x]/[y]
Please send the EDID
file
EDID Upgrade OK!
EDID RS232
CONTROL 1111
Feedback Example
DigitAudio ON with
[x]/ ALL Outputs
DigitAudio OFF with
[x]/ ALL Outputs
EDID
GUI