Atag VA6611RT Use & Care Manual page 47

Step 7. Attaching the toe kick (if applicable)
When fitting the kickboard, choose a size best
suited to the installation. Start by testing the high
kickboard. If the dishwasher door hits the kickboard
when opened, change to the lower kickboard. For
installations with a worktop height of 900 mm, the
higher kickboard is recommended. For installations
with a worktop height of 850 mm, the lower kick­
board is recommended.
1. Attach the supplied sound insulation material to
the back of the kickboard (certain models only).
If you use the low kickboard, adjust the height
of the insulation material by removing the thin
strip.
2. Loosen the holders for the kickboard by moving
the grey catches to the side.
3. Adjust the holders (pull out or push in) until
they are on a level with the surrounding kitchen
plinth.
Adjust the height of the insulation material
3
2