Step 6. Securing the dishwasher
1. Pull out the upper basket, and the centre basket
if present, and turn the basket stop on the run
ner outwards.
2. Remove the upper basket, and the centre basket
if present, by pulling the basket(s) out as far as
possible. This is to make more space available
during installation.
3. Remove the lower basket. Otherwise it easily
rolls out if you need to adjust the dishwasher
during installation.
4. Connec. Screw the dishwasher to the worktop
from the inside or to the
If the worktop is a hard material, such as marble,
screw the dishwasher to the side cabinets. Use
the supplied plastic spacers when screwing the
dishwasher into place!
cabinets
on either side.
Securing to worktop
Securing to side
cabinets